Week 10 (Fyp 2)

Objectives :

- Update coding with arduino software

Activity:

- Checking Coding For Arduino To control the dim of light and water pump speed motor


Result:

Figure 1: Coding

- Im using pwm pin 5 for Led and pwm pin 6 for pump.


Conclusion:

As a conclusion, the coding was being upload into arduino uno and being connected to led and pump. I also able to control the dim of led and also the speed of water pump motor by using analog in android application .

Week 9 (Fyp 2)

Objectives:

1) To brief Final Year Report Writing
2) To make sure all the student can clearly understand about the FYP2 semester 2.
3) To make sure student to proceed their work according the project schedule

Activity:

Student attend Fyp2 Briefing as follow:

Date : 30. 11.2016

Time: 2.30pm-5.00pm

Venue: TTL 1

The attendance is compulsory to all FYP 2 student.

Conclusion:

As a conclusion for this week, i understand clearly about the final year report writing and know how to do it very well. 

Week 8 (Fyp 2)

Objective:

- Testing Photovoltaic Solar thermal with battery and led

Activity:

- Testing Led dimmable with photovoltaic solar thermal
- Testing charge battery with photovoltaic solar thermal

Figure 1: Testing on Led Lighting with Photovoltaic Solar Thermal

Figure 2:  Testing charge battery with photovoltaic solar thermal

Week 6 & 7 (Fyp 2)

Objectives

- To Testing Project For Application on phone 

- To testing circuit

Activity:

- design of circuit wiring and show to my supervisor to check

- testing dimmable led with adruino and also with application on android phone.

- testing circuit wiring

Figure 1: Arduino Circuit

Video 1: Testing on Led Dimmable

Figure 2 : Testing on led dimmable

Week 5 (Fyp 2)

 Fyp 2.

Objective:
 -  To study about Arduino software

Activity:

Arduino Software

The Arduino hardware has built-in support for serial communication on pins 0 and 1 (which also goes to the computer via the USB connection). The native serial support happens via a piece of hardware (built into the chip) called a UART. This hardware allows the Atmega chip to receive serial communication even while working on other tasks, as long as there room in the 64 byte serial buffer. The SoftwareSerial library has been developed to allow serial communication on other digital pins of the Arduino, using software to replicate the functionality (hence the name "SoftwareSerial"). It is possible to have multiple software serial ports with speeds up to 115200 bps. A parameter enables inverted signaling for devices which require that protocol.

Content:

- Knows how to use arduino software
- Knows how to make a connection from arduino to Bluetooth Hc-06


Result:

- I know how to use the application of arduino software from zero to one . I also learn how to make connection between arduino to bluetooth Hc-06

Week 4 (Fyp 2)

Objective:
 - Designing a project structure

Activity:
 - The project  structure  that design will depend on project budget
- The project structure  may be simple or quite complex, depending on requirement
- The structure is combined by using welding


Conclusion:

 As a conclusion, this project was being design completely

Week 3 (Fyp 2)

Objective:
 - To briefing of FYP handbook, Project Development, Progress Report, Final Report, Attendance, Assessment forms.

Activity:
 - This meeting was held was by Madam Nurlida.
 - Student need to update the logbook/blog regularly
 - Student must meet supervisor for consultation
 - Attendance that below than 80% will be bared
 - Fyp assessment :

+ progress report (logbook/blog) - 20%
+ Presentation                              - 40%
+ Final Year Project Report         - 40%

- Industry Day (presentation)

+ presentation and demonstration of Final Year Project II will be on week 14, Wednesday ( 4 January 2017)
+ Student have to prepare FYP poster, results of project and prototype.


Conclusion:

As a conclusion, the briefing was done by Madam Nurlida. The objective was successfully achieved.

Week 2 (Fyp 2)

Activity:

- To updates latest project with my supervisor for final year project Fyp 2.

Objective:
 -Update latest progress for FYP 2

Content:

- I met my supervisor Sir Akram to discussed about the plan for my Final Year Project 2. He gives me some advise to manage time and also work as group for doing my FYP with others friends so I don't be too stress. I also discuss about the component and project design that i have to use for my project and suitable software need to use to make the project. He also request me to change my component for my project as i change the software by using labview in fyp 1 to arduino in fyp 2.


Result:

- This are the list of component that i will use for my project :

1. Arduino Uno
2. Semi-Transparent Photovoltaic Module
3. Water Tank
4. Valve 12 Volts
5. Water Pump 12 volt
6. Copper Rode
7. Dimmable Led 12 volt
8. Battery 12 volt

-Software

1. Arduino Software

Conclusion:

 As a conclusion, i have meet my supervisor to manage the meet time with him and also i have get a permission from my supervisor about the idea to finalize the new component and design my project that i need to do for my Final Year project 2.

Week 1 (Fyp 2)

		This is calendar of schedules of Final Year Project 2 ( S2'2016). this schedules can guide me to finish my project on time.  UNIVERSITI KUALA LUMPUR  BRITISH MALAYSIAN INSTITUTE Final Year Project Calendar S2 2016
Week	FYP 1 WPB 49804		FYP Diploma WPD 39806	FYP 2 WPB 49906
2	FYP Briefing#1 FYP implementation and   requirements: - Title registration - FYP Handbook - FYP Logbook  (Wednesday – 2.00 p.m)		FYP Briefing#1 FYP implementation and   requirements: - Title registration - FYP Handbook - FYP Logbook  (Wednesday – 3.00 p.m)
3				FYP Briefing#1 - Project    Development - Progress Report (Log      Book/ Blog) (Wednesday – 3.00 p.m)
4	FYP Title Registration Due: End of W4		FYP Title Registration Due: End of W4
8	FYP Briefing#2 / FYP Proposal Writing Workshop -  Proposal Report  (Wednesday – 3.00 p.m)
9			FYP Briefing #2 - Report writing  (Wednesday – 3.00 p.m)	FYP Briefing #2/ Thesis Writing Workshop - Report writing  (Wednesday – 3.00 p.m)
10	FYP Briefing #3 - Proposal    Presentation - FYP submission  (Wednesday – 3.00 p.m)
11			FYP Briefing #3   - Project Demo   Preparation - Final report   compilation (Wednesday – 3.00 p.m)	FYP Briefing #3   - Project Demo   Preparation - Final report   compilation (Wednesday – 3.00 p.m)
12	Presentation Day Tentative: (Wednesday – 3.00~5.00p.m)
13	Submission of Project Progress Report (Log Book/ Blog Complete Project Proposal Report FYP 2 Course Pre-registration  for S1’2017		Industry Day  Project/Poster             Presentation -           Top 20 selection Tentative:  (Wednesday –2.00pm to 5.00pm)	Industry Day  Project/Poster             Presentation -           Top 20 selection  Tentative (Wednesday – 9.00am to 1.00pm)
14			Top 20 Competition FYP Submission  Progress Report      (Blog/Logbook)  Draft  Final Report Due: End of W14	Top 20 Competition FYP Submission  Progress Report      (Blog/Logbook)  Draft  Final Report Due: End of W14
16			Return of the corrected draft copy of the final report to students for correction	Return of the corrected draft copy of the final report to students for correction
17			Submission of - Final Report (hard copy)   to Resource Centre	Submission  of Final Report/Thesis (hard copy) to Resource Centre

Week 14

Objective:

To finish and submit report and blog to supervisor

Method:

- Finish up my final proposal report

Analysis:

This is the last week for finish my proposal report, Sir Akram which is mysupervisor ask me to submit the proposal report in his pigeon hole as he not at BMI. The last day to submit is on this friday.

conclusion;

As conclusion, on this friday (12.5.2016) i should be able to submit the report.

Week 13

Objective :

The final year presentation for FYP1

Analysis:

The presentation took place in the Gemilang Hall. The presentation started on 2,30 pm. I was assigned to two assessors from the FYP committee whom are lectures from Electrical Section. The assessors are Sir Dr. Syed Faiz and Madam Zurin.

For presentation,Alhamdulilah i was able to answers all the question that been given from the both assessors.

Conclusion:

Thought the presentation end well, I still need to finish up my and correct my proposal report.

                        On the day of presentation

Week 12

Objective :

- Make final preparation for slide presentation

Method:

- Update blog
-Update slide presentation and also proposal

Result ;

-Almost finish 90% for project proposal
- 100% finish for slide presentation

Conclusion:

As a conclusion, i have finish my slide presentation and get ready for fyp 1 presentation on next week.

Week 11

objective:

- To list the price for all component and instruments for this project

Method :

- list all the component that need
-survey the price on market

Result:

Conclusion:

After make some research and survey about the component and cost needed for this project, its maybe cost about around Rm700.00. Its too expensive for me but i will claim it with Mara later .

Week 10

Objective :

-To make slide presentation

Method :

- Search some information about this project
- Make slide presentation by using power point

Result :

conclusion:
- as a conclusion, i have started doing my slide for presentation by using power point.

Week 9

Objective

- Identify the system that been use in this project

Method

- After done some research, i manage create the block diagram and flow chart to shown the progress of the system in this project.

 

Below is the block diagram and flow chart:

                                                              (a) Block Diagram

                                                                  (b) flow chart

                                                                (c)Flow Chart for occupancy sensor

                                                                   (d)Flow Chart for daylight sensor

conclusion:

As conclusion, I successfully can design my project to get more knowledge by do more research and come out with this block diagram and flow chart.

Week 8

Date : 30 March 2016

Objective:

-Making Proposal report

Method:

- Writing proposal report
- Create a Gantt chart for making the project
- Also make some study about this project

Conclusion:

As conclusion, i just make gantt chart to show some schedule that i need to follow for my project.

Week 7

Date: 25 March 2016

Objective:

Attend Fyp Briefing

Method:

^ I attend Fyp briefing at Seminar room level 1.
^ The lecturer give some guideline on how to make a better proposal report.
^ I make some notes on how to do proposal report

Conclusion:

As conclusion, i will make a better report with the format have given

Week 6

Date: 18 March 2016

Objective:
+ Proceed with the research
+ Update Blog

Method:

+ do some research on the component needed in my project
+ Update blog


Conclusio:

+ i just update my blog and proceed do some research on my project on internet

Week 5

Date : 10 March 2017

Objective: Discuss on how to proceed with the proposal report

Method:

- Meet Sir Akram to asking for the procedure of the proposal report.
- He ask me to list all the component needed for my project
- Also, ask me to draw the prototype in diagram.

Conclusion:

-Make some research to proceed with the proposal. Make a list of component and drawing.

Week 4

Date : 1 March 2016

Objective:

- To present the title of my project

Method :

- Do some research about my project
- Decide to proceed with it

Result:

- My project Title :

"Development Of An automatic Lighting And Water Heating Control System Powered By Semi-Transparent PV/T Module"

Synopsis:
 When solar energy hit on the surface of the Semi-Transparent  PV/T, some of energy will convert to electricity and the remaining will become wasting. In this study, student will develop the system that could generate clean energy , water heating as well as reduce artificial lighting load of the building.

Category:

-Renewable Energy & Environment

Conclusion:

- My final year project supervisor had decide me to proceed with this project

Week 3

Date : 25 Feb 2016

Objective:

- To decide  to do LogBook Or Blog

Method :

- See supervisor
- Ask for opinion

Result
- My supervisor just say its depend on me , he give me some opinion and ask me to proceed do.


conclusion:

- So, i decided to do blog and proceed with it as my supervisor agreed with my choice.

Week 2

Date : 17 Feb 2016

Objective:

-Attend first fyp briefing
-Take notes importing information

Method :

- Take note
- Project title registration


Result:

-Assessment Scheme :

• LogBook / Blog : 30%
• Presentation : 30%\
• Final Project Report: 30%

-Submission :

• LogBook / Blog; Week 14
• Presentation : Week 11
• Final Project Report: Week 14

Conclusion

I must find the suitable project title and keep update on my supervisor before week 4.

Week 1

Date : 10 Feb 2016
Title : Development Of An automatic Lighting And Water Heating Control System Powered By Semi-Transparent PV/T Module

Objective : 

• To achieve target of FYP
• To confirm the tittle with the supervisor 
• To find suitable supervisor

Methods: 

• Find supervisor 
• Asking  supervisor about my project whether my tittle is related with my course

Result :

• Decide to choose Sir Mohd Akram as my supervisor.. So, i decide to confirm title of my project of Development of An automatic Lighting and water heating control system powered by semi-transparent PV/T module ot. Other than that, i have been asked about my tittle and  than he told me that if i want to change tittle please do it in until week 4. 

Conclusion: 

My   supervisor he agreed with my tittle and project that is the Development Of An automatic Lighting And Water Heating Control System Powered By Semi-Transparent PV/T Module

 and sir give his opinion about my  tittle and just proceed it.