Week 10 (Fyp 2)

Objectives :

- Update coding with arduino software

Activity:

- Checking Coding For Arduino To control the dim of light and water pump speed motor


Result:

Figure 1: Coding

- Im using pwm pin 5 for Led and pwm pin 6 for pump.


Conclusion:

As a conclusion, the coding was being upload into arduino uno and being connected to led and pump. I also able to control the dim of led and also the speed of water pump motor by using analog in android application .

Week 9 (Fyp 2)

Objectives:

1) To brief Final Year Report Writing
2) To make sure all the student can clearly understand about the FYP2 semester 2.
3) To make sure student to proceed their work according the project schedule

Activity:

Student attend Fyp2 Briefing as follow:

Date : 30. 11.2016

Time: 2.30pm-5.00pm

Venue: TTL 1

The attendance is compulsory to all FYP 2 student.

Conclusion:

As a conclusion for this week, i understand clearly about the final year report writing and know how to do it very well. 

Week 8 (Fyp 2)

Objective:

- Testing Photovoltaic Solar thermal with battery and led

Activity:

- Testing Led dimmable with photovoltaic solar thermal
- Testing charge battery with photovoltaic solar thermal

Figure 1: Testing on Led Lighting with Photovoltaic Solar Thermal

Figure 2:  Testing charge battery with photovoltaic solar thermal

Week 6 & 7 (Fyp 2)

Objectives

- To Testing Project For Application on phone 

- To testing circuit

Activity:

- design of circuit wiring and show to my supervisor to check

- testing dimmable led with adruino and also with application on android phone.

- testing circuit wiring

Figure 1: Arduino Circuit

Video 1: Testing on Led Dimmable

Figure 2 : Testing on led dimmable

Week 5 (Fyp 2)

 Fyp 2.

Objective:
 -  To study about Arduino software

Activity:

Arduino Software

The Arduino hardware has built-in support for serial communication on pins 0 and 1 (which also goes to the computer via the USB connection). The native serial support happens via a piece of hardware (built into the chip) called a UART. This hardware allows the Atmega chip to receive serial communication even while working on other tasks, as long as there room in the 64 byte serial buffer. The SoftwareSerial library has been developed to allow serial communication on other digital pins of the Arduino, using software to replicate the functionality (hence the name "SoftwareSerial"). It is possible to have multiple software serial ports with speeds up to 115200 bps. A parameter enables inverted signaling for devices which require that protocol.

Content:

- Knows how to use arduino software
- Knows how to make a connection from arduino to Bluetooth Hc-06


Result:

- I know how to use the application of arduino software from zero to one . I also learn how to make connection between arduino to bluetooth Hc-06

Week 4 (Fyp 2)

Objective:
 - Designing a project structure

Activity:
 - The project  structure  that design will depend on project budget
- The project structure  may be simple or quite complex, depending on requirement
- The structure is combined by using welding


Conclusion:

 As a conclusion, this project was being design completely

Week 3 (Fyp 2)

Objective:
 - To briefing of FYP handbook, Project Development, Progress Report, Final Report, Attendance, Assessment forms.

Activity:
 - This meeting was held was by Madam Nurlida.
 - Student need to update the logbook/blog regularly
 - Student must meet supervisor for consultation
 - Attendance that below than 80% will be bared
 - Fyp assessment :

+ progress report (logbook/blog) - 20%
+ Presentation                              - 40%
+ Final Year Project Report         - 40%

- Industry Day (presentation)

+ presentation and demonstration of Final Year Project II will be on week 14, Wednesday ( 4 January 2017)
+ Student have to prepare FYP poster, results of project and prototype.


Conclusion:

As a conclusion, the briefing was done by Madam Nurlida. The objective was successfully achieved.